Activar o God Mode no Windows 10

Deve clicar com o botão direito do rato em qualquer parte do desktop. No menu de contexto que for aberto devem escolher primeiro a opção Novo e depois Pasta. O nome a dar a essa pasta é especial:

GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

Ira surgir um ícone com o nome GodMode e uma imagem associada à gestão do sistema. 

Credits

Update firmware with NetOdin

This process will factory reset your Watch, so make sure you’ve backed up everything you need!

  1. Hold down the Home button for 6-10 seconds until the message ” Rebooting … “
  2. Quickly press Home three times until the Reboot Menu appears. (The menu is available for about 10 seconds, after which the clock goes back to “Rebooting …”)
  3. The menu selection is made by long holding Home button. To go into Download (wireless mode) press the home button until “Download (Wireless)” is highlighted, then hold down the Home button.
  4. Download mode will load in WPS mode. Press Home twice to change the mode to the AP.
  5. Connect to the access point that appears (for example, SM-R800-a2a5) (ODIN for some reason does not see the device if several networks are connected.)
  6. Run NetOdin3 and then set the firmware files for BL, AP and CSC, then click Start (Copying/flashing of firmware takes about 20 minutes).
  7. After the files are downloaded, the Watch will reboot. Again, hold Home and highlight & select Recovery in the Reboot menu.
  8. The “Setting Up” screen and “Resetting” screen should appear and after that the Watch will reboot and boot as usual.

N.B. It is advisable to check whether you have disabled the function “find my watch” or make sure you remember the password to your Samsung Account

Credits

CWP PHP Selector

From version 0.9.8 all CWP servers have a CWP PHP Selector which can install all PHP versions with a single click.
Using CWP PHP selector you can use a different PHP version per folder or domain.

Usage instructions
In each folder where you want to run a different PHP version you only need to define it in the .htaccess file.

Example for file: /home/USERNAME/public_html/.htaccess

Use PHP 4.4
AddHandler application/x-httpd-php44 .php

Credits

Bypass the PowerShell Execution Policy

  • Use the “Bypass” Execution Policy Flag
This is a nice flag added by Microsoft that will bypass the execution policy when you’re executing scripts from a file. When this flag is used Microsoft states that “Nothing is blocked and there are no warnings or prompts”. This technique does not result in a configuration change or require writing to disk.
PowerShell.exe -ExecutionPolicy Bypass -File .runme.ps1
  • Use the “Unrestricted” Execution Policy Flag
This similar to the “Bypass” flag. However, when this flag is used Microsoft states that it “Loads all configuration files and runs all scripts. If you run an unsigned script that was downloaded from the Internet, you are prompted for permission before it runs.” This technique does not result in a configuration change or require writing to disk.
PowerShell.exe -ExecutionPolicy UnRestricted -File .runme.ps1
  • Use the “Remote-Signed” Execution Policy Flag
Create your script then follow the tutorial written by Carlos Perez to sign it. Finally,run it using the command below:
PowerShell.exe -ExecutionPolicy Remote-signed -File .runme.ps1

Transfer email accounts and messages between cPanel servers

You can transfer the email accounts and messages for a particular domain, from one cPanel server to another, by following the steps below.
 
Let's call the domain yourdomain.com for example. Make sure that you have yourdomain.com added as Parked or Addon in cPanel at the destination server.
 
Transferring the email accounts
Open your preferred FTP client, connect to the hosting account where the email accounts/messages currently are and navigate to the etc/ folder (located under /home/cpaneluser/etc/). There you will see a folder named yourdomain.com (the name of the domain you want to transfer the accounts/messages for). Download this folder anywhere to your local computer. This folder contains the email addresses (server configuration setup, encrypted passwords, etc.) associated with the corresponding domain.
 
Now connect with your FTP client to the server where you want to transfer the accounts. Navigate again to the etc/ folder and upload the previously downloaded yourdomain.com folder.
 
With this, the transfer of the email accounts is completed.
 
Before proceeding with the messages transfer you should remove or rename the downloaded yourdomain.com directory on your local computer.
 
Transferring the email messages
Simply repeat the process from step 1. This time, however, you should navigate to the mail/ folder (located under /home/cpaneluser/mail/). Download the directory called yourdomain.com to your local computer. This directory contains the messages for yourdomain.com. After that connect to the other account where you want to transfer the messages and upload the folder yourdomain.com to the mail/ directory.
 
With this, the transfer of your email accounts and messages is completed.
 
Now you can access cPanel -> Email accounts of the destination hosting account and check your transferred emails.
 
Your DNS provider will be able to assist you with the MX record changes, so you can point the mail-flow for yourdomain.com to the new hosting server.
 

Coloured equation in Impress

There is a color statement in Math that can be combined with a limited palette (RGB+CMYK+white) to set the hue of elements.
 
The basic form is:
 
color <keyword> { math element }
 
Valid <keyword> entries appear to be: red, green, blue, cyan, magenta, yellow, black, white. For example:
 
color red {sum from{color magenta {i=1}} to{color cyan{100}} color blue {i.}}
 

Disable APIPA (Automatic Private IP Addressing)

APIPA (Automatic Private IP Addressing) – Mechanism in a small network that clients will automatically allocated themselves an IP address in the range of 169.254.x.x if no DHCP server can be contacted.

 

It may be desirable to disable this and to do this perform the following:

 
  1. Start the registry editor (Regedit.exe)
  2. Move to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces
  3. Select the required interface
  4. From the Edit menu select New – DWORD value
  5. Enter a name of IPAutoconfigurationEnabled and press Enter
  6. Double click the new value and set to 0. Click OK
  7. Close the registry editor

 

If you have multiple adapters and wish to disable for all just create and set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\IPAutoconfigurationEnabled to 0.
 

Unprotect/Remove Excel Password

  1. Change the extension of you Excel file from .xlsx to .zip
  2. Extract these XML files outside the folder,they represent the worksheets in the Excel file.
    1. Location: xl -> worksheets -> *.xml
  3. Modified codes using simple “Notepad”.
    1. Open XML File & Delete  Excel v. 2007-10 “sheetProtection password=… />” v. 2013 – “sheetProtection algorithmName=…/>”
  4. Save & Close Xml File
  5. The modified XML file should be put again in the zipped file to replace the old XML files.
  6. Run File