Activar o God Mode no Windows 10

Deve clicar com o botão direito do rato em qualquer parte do desktop. No menu de contexto que for aberto devem escolher primeiro a opção Novo e depois Pasta. O nome a dar a essa pasta é especial:

GodMode.{ED7BA470-8E54-465E-825C-99712043E01C}

Ira surgir um ícone com o nome GodMode e uma imagem associada à gestão do sistema. 

Credits

Update firmware with NetOdin

This process will factory reset your Watch, so make sure you’ve backed up everything you need!

  1. Hold down the Home button for 6-10 seconds until the message ” Rebooting … “
  2. Quickly press Home three times until the Reboot Menu appears. (The menu is available for about 10 seconds, after which the clock goes back to “Rebooting …”)
  3. The menu selection is made by long holding Home button. To go into Download (wireless mode) press the home button until “Download (Wireless)” is highlighted, then hold down the Home button.
  4. Download mode will load in WPS mode. Press Home twice to change the mode to the AP.
  5. Connect to the access point that appears (for example, SM-R800-a2a5) (ODIN for some reason does not see the device if several networks are connected.)
  6. Run NetOdin3 and then set the firmware files for BL, AP and CSC, then click Start (Copying/flashing of firmware takes about 20 minutes).
  7. After the files are downloaded, the Watch will reboot. Again, hold Home and highlight & select Recovery in the Reboot menu.
  8. The “Setting Up” screen and “Resetting” screen should appear and after that the Watch will reboot and boot as usual.

N.B. It is advisable to check whether you have disabled the function “find my watch” or make sure you remember the password to your Samsung Account

Credits